Search in Category
Filter Your Search
Measurement System
Grade
Finish
Thread
Thread Pitch
Thread Coverage
Length
RoHS Compliant?
REACH Compliant?
PROP 65 Compliant?
Shop by Category
Hex Cap Screws and Hex Bolts
.jpg)
Hex cap screws have a chamfered end and washer face under the head. Hex bolts have neither feature and require a nut. Both parts use a external hexagonal head.
- 0.380 " (2)
- 11.3 mm (3)
- 12 mm (5)
- 1/2 " (6)
- 13 mm (3)
- 9/16 " (1)
- 5/8 " (1)
- 16 mm (2)
- 3/4 " (3)
- 20 mm (6)
- 22 mm (1)
- 7/8 " (3)
- 25 mm (3)
- 1 " (9)
- 28 mm (1)
- 30 mm (2)
- 35 mm (6)
- 40 mm (3)
- 45 mm (8)
- 50 mm (2)
- 2 " (4)
- 55 mm (2)
- 60 mm (3)
- 70 mm (1)
- 80 mm (1)
- 85 mm (1)
- 87 mm (1)
- 90 mm (1)
- 95 mm (1)
- 4 " (3)
- 110 mm (1)
- 115 mm (1)
- 125 mm (1)
- 5 " (5)
- 130 mm (1)
- 6.170 " (1)
- 6.210 " (2)
- 165 mm (1)
- 6.88 " (1)
- 176 mm (1)
- 7 " (1)
- 248.5 mm (2)
- 1 1/2 " (7)
- 1 1/4 " (3)
- 12 " (1)
- 1 3/4 " (4)
- 1 3/8 " (1)
- 369 mm (1)
- 18 " (2)
- 460 mm (1)
- 2 1/2 " (2)
- 2 1/4 " (2)
- 2 3/4 " (1)
- 654 mm (1)
- 3 1/2 " (2)
- 3 5/8 " (1)
- 4 3/4 " (1)
- 5 1/2 " (2)
- 5 3/4 " (1)
- 6 1/2 " (2)
- 7 1/2 " (1)
- 8 1/2 " (1)
M8-1.25 X 85 HEX CAP DIN 931 12.9 GEO
M8-1.25 X 85 HEX CAP DIN 931 12.9 GEO 12.9 STEEL GEOMET 321 + ML BLACK 720 HRS WITHOUT RED RUST ASTM F1136M-11 GR 5 NC TO PRINT # 589032542 REV CB P/N 250001035
M8-1.25 X 55 HEX CAP DIN 931 10.9 BZN
M8-1.25 X 55 HEX CAP DIN 931 10.9 BZN 10.9 STEEL BZN = TRIV BLACK ZINC NICKEL ASTM F1941M-07 Fe/Zn-Ni 8ET/F W/SEALANT PLUS BAKE TO PRINT # 589032542 REV BY P/N 207085556
M8-1.25 X 30 HEX CAP DIN 933 8.8 BZN
M8-1.25 X 30 HEX CAP DIN 933 8.8 BZN TRIVALENT BLACK ZINC NICKEL ASTM F1941M-07 Fe/Zn-Ni 8ET/F W/SEALANT PRINT# 589032542 REV Q / PN# 207183054
M8-1.25 X 130 HEX CAP ISO4014 10.9 BZN
M8-1.25 X 130 HEX CAP ISO4014 10.9 BZN 10.9 STEEL ISO4014/DIN931 BZN = TRIVALENT BLACK ZINC NICKEL ASTM F1941M-07 Fe/Zn-Ni ET/F W/SEALANT PRINT# 589032542 REV DT PART# 230083056
1-8 X 5 HEX CAP SCREW GR 8 Z&Y W/FITTING
1-8 X 5 HEX CAP SCREW GR 8 Z&Y W/FITTING 2.60” HOLE DOWN CENTER OF BOLT FROM HEAD – TAPPED 1/8-27 PTF X .50” FROM HEAD – DRILLED .120” THRU HOLE IN BODY W/ALEMITE FITTING # 1610BL INSTALLED IN HEAD DRAWING # 500000085
1-8 X 5 HEX CAP SCREW GR 8 Z&Y DRILLED
1-8 X 5 HEX CAP SCREW GR 8 Z&Y DRILLED 2.60” HOLE DOWN CENTER OF BOLT FROM HEAD – TAPPED 1/8-27 PTF X .50” FROM HEAD – DRILLED .120” THRU HOLE IN BODY PRINT# SJF20-0003 REV 0
M10-1.5 X 55 HEX CAP P/T I4014 8.8 BZN
M10-1.5 X 55 HEX CAP P/T I4014 8.8 BZN TRIVALENT BLACK ZINC NICKEL ASTM F194M-07 FE/ZN-Ni 8TE/F W/SEALANT TO PRINT #589032542 REV H P/N 207005554
M8-1.25 X 30 HEX CAP DIN 933 8.8 ZINC
M8-1.25 X 30 HEX CAP DIN 933 8.8 ZINC TENSILE 110KSI MIN SST 240 HRS NO RED PRINT # V1-31-597
M3-.5 X 11.3 HEX CAP DIN 933 8.8 Z&Y PRI
M3-.5 X 11.3 HEX CAP DIN 933 8.8 Z&Y PRI PRINT # 4035.200.19311 REV A CLEANED AND PACKAGED PER GSA 07 4320 POLY 100
